Rivet Nut USA is proud to offer an extensive range of IN STOCK RivetKing® blind rivets for your various application requirements. Below lists more information on the various types of rivets, along with the associated catalog page for further dimensional and performance details on each rivet.

Your technical sales engineers are available at Rivet Nut USA, just give us a call or send us an email. We typically revert quotes SAME DAY. We are the largest supplier of in-stock specialty fasteners. Remember to ask us about the right RivetKing® installation tool for your rivet!

RivetKing® Standard Blind Rivets Catalog Information

ABA Series: Aluminum | Aluminum Open End

These RivetKing® blind rivets are considered light duty rivets that require a fixed hole size. The rivet has an open end with an aluminum body and aluminum mandrel, giving it strong oxidization resistance and easy installation. The body diameters are typically available in five sizes: 3/32”, 1/8”, 5/32”, 3/16”, and 1/4″. These blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750”, and 1.00 inch. This rivet comes with a standard flange-dome head. Large flange or countersunk head is available, if preferred.

A = Aluminum Body
B = Dome Head
A = Aluminum Mandrel

Typical Part Numbers:
ABA-32, ABA-34, ABA-41, ABA-42, ABA-43, ABA-44, ABA-45, ABA-46, ABA-48, ABA-410, ABA-412, ABA-52, ABA-53, ABA-54, ABA-56, ABA-58, ABA-62, ABA-63, ABA-64, ABA-66, ABA-68, ABA-610, ABA-612, ABA-614, ABA-616, ABA-84, ABA-86, ABA-88, ABA-810, ABA-812, ABA-814, and ABA-816.

Click to Open a Catalog Excerpt - RivetKing®

ABS Series: Aluminum | Steel Phosphated - Aluminum | Steel Zinc Plated Open End

These RivetKing® blind rivets are considered light duty rivets that require a fixed hole size. The rivet has an open end, having either an aluminum body with steel phosphate mandrel or aluminum body with steel zinc plated mandrel. The aluminum body is polished to protect from oxidization. Body diameters are typically available in five sizes: 3/32”, 1/8”, 5/32”, 3/16”, and 1/4″. These blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750”, and 1 inch. This rivet comes with a standard flange-dome head. Large flange or countersunk head is available, if preferred.

A = Aluminum Body
B = Dome Head
S = Steel Mandrel

Typical Part Numbers:
ABS-32, ABS-34, ABS-41, ABS-42, ABS-43, ABS-44, ABS-45, ABS-46, ABS-48, ABS-410, ABS-412, ABS-52, ABS-53, ABS-54, ABS-56, ABS-58, ABS-510, ABS-62, ABS-63, ABS-64, ABS-66, ABS-68, ABS-610, ABS-612, ABS-614, ABS-616, ABS-84, ABS-86, ABS-88, ABS-810, ABS-812, ABS-814, and ABS-816.

Click to Open a Catalog Excerpt - RivetKing®

SBS Series: Steel Trivalent Zinc Plated | Steel Trivalent Zinc Plated Open End

These blind rivets are considered a light duty rivet that requires a fixed hole size. The rivet has an open end and has a steel trivalent zinc plated body with a steel trivalent zinc plated mandrel. The body diameters are typically available in five sizes: 3/32”, 1/8”, 5/32”, 3/16”, and 1/4″. These blind rivets are offered in a variety of grip ranges. They can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750”, and 1 inch. These RivetKing® rivets come with a standard flange-dome head. Large flange or countersunk head is available, if preferred.

S = Steel Body
B = Dome Head
S = Steel Mandrel

Typical Part Numbers:
SBS-32, SBS-34, SBS-41, SBS-42, SBS-43, SBS-44, SBS-45, SBS-46, SBS-48, SBS-410, SBS-412, SBS-52, SBS-53, SBS-54, SBS-56, SBS-58, SBS-510, SBS-62, SBS-63, SBS-64, SBS-66, SBS-68, SBS-610, SBS-612, SBS-614, SBS-616, SBS-84, SBS-86, SBS-88, SBS-810, SBS-812, SBS-814, and SBS-816.

Click to Open a Catalog Excerpt - RivetKing®

FBS Series: Stainless Steel | Steel Trivalent Zinc Open End

These blind rivets are considered a light duty rivet that requires a fixed hole size. The rivet has an open end with a stainless steel plated body and a steel trivalent zinc mandrel offering strong corrosion resistance. (See the FBF series for ultimate corrosion resistance; both the body and mandrel are made of stainless steel.) The RivetKing® FBS series offer body diameters typically available in five sizes: 3/32”, 1/8”, 5/32”, 3/16”, and 1/4″. These blind rivets are offered in a variety of grip ranges. They can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, and .750”. This rivet comes with a standard flange-dome head. Large flange or countersunk head is available, if preferred.

F = Stainless Steel Body
B = Dome Head
S = Steel Mandrel

Typical RivetKing® Part numbers: 
FBS-32, FBS-34, FBS-41, FBS-42, FBS-43, FBS-44, FBS-46, FBS-48, FBS-52, FBS-53, FBS-54, FBS-56, FBS-58, FBS-510, FBS-62, FBS-63, FBS-64, FBS-66, FBS-68, FBS-610, FBS-612, FBS-614, FBS-616, FBS-84, FBS-86, FBS-88, FBS-810, and FBS-812.

Click to Open a Catalog Excerpt - RivetKing®

FBF Series: Stainless Steel | Stainless Steel Open End

These blind rivets are considered light duty rivets that requires a fixed hole size. The rivet typically has an open end with a stainless steel plated body and a stainless steel mandrel. The FBF series is superior in that the entire fastener is stainless so it offers superior avoidance of rust and oxidization. (See the FBS series for a cost savings if your application would allow a stainless steel body with a steel zinc mandrel.) The body diameters are typically available in five sizes: 3/32”, 1/8”, 5/32”, 3/16”, and 1/4″. These RivetKing® blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750″, and 1.00”. This rivet comes with a standard flange-dome head. Large flange or countersunk head is available, if preferred.

F = Stainless Steel Body
B = Dome Head
F = Stainless Steel Mandrel

Typical RivetKing® Part numbers:
FBF-32, FBF-34, FBF-41, FBF-42, FBF-43, FBF-44, FBF-45, FBF-46, FBF-48, FBF-410, FBF-412, FBF-52, FBF-53, FBF-54, FBF-56, FBF-58, FBF-62, FBF-63, FBF-64, FBF-66, FBF-68, FBF-610, FBF-612, FBF-614, FBF-616, FBF-84, FBF-86, FBF-88, FBF-810, FBF-812, FBF-814, and FBF-816.

Click to Open a Catalog Excerpt - RivetKing®

CBS Series: Copper | Steel Copper Plated

These blind rivets are considered light duty rivets that requires a fixed hole size. This RivetKing® rivet has an open end with a copper body and a steel copper plated mandrel. The body diameter is 1/8”. These blind rivets are typically offered in three grip ranges: .020-.125″, .126-.187″, and .188-.250″, and comes with a standard flange-dome head. These CBS series copper rivets are cost conscious option for roofing or electronic application (good conductivity and corrosion resistance), as the mandrel is lower cost steel with a copper plating. For superior conductivity coupled with superior corrosion resistance, see the CBB series (copper body with brass mandrel, no steel involved).

C = Copper Body
B = Dome Head
S = Steel Mandrel

Typical RivetKing® Part numbers:
CBS-42, CBS-43, and CBS-44.

Click to Open a Catalog Excerpt - RivetKing®

CBB Series: Copper | Brass Blind Rivets

These blind rivets are considered a light duty rivet that requires a fixed hole size. It offers superior electronic conductivity and superior corrosion protection as the rivet is open end with a copper body and a solid brass mandrel. No steel is used on this RivetKing® blind rivet. The body diameter is typically offered as a 1/8”, and these blind rivets are typically offered in three grip ranges: .020-.125″, .126-.187″, and .188-.250″. The head is a standard flange-dome head. For a most cost-conscious option with good conductivity and corrosion protection, consider using the CBS series (copper body with steel mandrel that is copper plated).

C = Copper Body
B = Dome Head
B = Brass Mandrel

Typical RivetKing® Part numbers:
CBB-42, CBB-43, and CBB-44.

Click to Open a Catalog Excerpt - RivetKing®

ABA-CE Series: All Aluminum Dome Head Closed End

These blind rivets are used when a weatherproof / leakproof seal is needed. The closed end design prevents liquids, moisture, air, and other contaminants from moving through the riveted hole and/or the rivet itself. As these RivetKing® rivets are all aluminum, they offer good natural corrosion resistance. (For a rivet requiring higher performance demands, see the ABS-CE series.) These ABA-CE blind rivets are considered a light duty rivet that requires a fixed hole size. The body and mandrel are aluminum. The head has the standard dome shape. The body diameters are typically available in three sizes: 1/8”, 5/32”, and 3/16”. The 3/32” and 1/4” diameters are available upon request with a higher minimum order quantity. These closed end blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750″, and 1.00”.

A = Aluminum Body
B = Dome Head
A = Aluminum Mandrel

Typical Part numbers:
ABA-41-CE, ABA-42-CE, ABA-43-CE, ABA-44-CE, ABA-45-CE, ABA-46-CE, ABA-48-CE, ABA-410-CE, ABA-412-CE, ABA-52-CE, ABA-53-CE, ABA-54-CE, ABA-55-CE, ABA-56-CE, ABA-58-CE, ABA-510-CE, ABA-62-CE, ABA-63-CE, ABA-64-CE, ABA-66-CE, ABA-68-CE, ABA-610-CE, ABA-612-CE, ABA-614-CE, and ABA-616-CE.

Click to Open a Catalog Excerpt - RivetKing®

ABS-CE Series: Aluminum | Steel Dome Head Closed End

These blind rivets are used when a weather-proof/leak-proof seal is needed. The closed end design prevents liquids, moisture, air, and other contaminants from entering the riveted hole and/or the rivet itself. These offer good mechanical performance while bringing the benefits of an aluminum body, but the steel phosphated mandrel may introduce some risk of rust. (To minimize rust risk, consider the all-aluminum rivet ABA-CE series.) These are considered light duty RivetKing® rivets that requires a fixed hole size. The rivet body is aluminum and the mandrel is steel phosphate. The head has the standard dome shape. These closed end blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750″, and 1 inch. The body diameters are typically available in three sizes: 1/8”, 5/32”, and 3/16”. 1/4” may be available upon request. Note, the 1/4” diameter rivets have a 1.250″ mandrel length minimum.

A = Aluminum Body
B = Dome Head
S = Steel Mandrel

Typical Part numbers:
ABS-41-CE, ABS-42-CE, ABS-43-CE, ABS-44-CE, ABS-45-CE, ABS-46-CE, ABS-48-CE, ABS-410-CE, ABS-412-CE, ABS-52-CE, ABS-53-CE, ABS-54-CE, ABS-55-CE, ABS-56-CE, ABS-58-CE, ABS-510-CE, ABS-62-CE, ABS-63-CE, ABS-64-CE, ABS-66-CE, ABS-68-CE, ABS-610-CE, ABS-612-CE, ABS-614-CE, ABS-616-CE, ABS-82-CE, ABS-84-CE, ABS-86-CE, ABS-88-CE, ABS-810-CE, ABS-812-CE, ABS-814-CE, and ABS-816-CE.

Click to Open a Catalog Excerpt - RivetKing®

SBS-CE Series: All Steel Dome Head Closed End

These closed end blind rivets are used when a weatherproof/leakproof seal is needed. The closed end design prevents liquids, moisture, air, and other contaminants from entering the riveted hole and/or the rivet itself. These offer good mechanical performance at a cost-conscious value. These are considered a light duty rivet that requires a fixed hole size. The rivet body and mandrel are made of steel trivalent zinc plated. The head has the standard dome shape. These closed end blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, and .750”. The body diameters are typically available in three sizes: 1/8”, 5/32”, and 3/16”. 3/32” and 1/4” may be available upon request.

S = Steel Body
B = Dome Head
S = Steel Mandrel

Typical RivetKing® Part numbers:
SBS-42-CE, SBS-43-CE, SBS-44-CE, SBS-45-CE, SBS-46-CE, SBS-48-CE, SBS-52-CE, SBS-53-CE, SBS-54-CE, SBS-56-CE, SBS-58-CE, SBS-510-CE, SBS-62-CE, SBS-63-CE, SBS-64-CE, SBS-66-CE, SBS-68-CE, SBS-610-CE, and SBS-612-CE.

Click to Open a Catalog Excerpt - RivetKing®

FBF-CE Series: Stainless Steel | Stainless Steel Closed End

These closed end RivetKing® blind rivets are used when a weatherproof/ leakproof seal is needed. The closed end design prevents liquids, moisture, air, and other contaminants from entering the riveted hole and/or the rivet itself. These are considered a light duty rivet that requires a fixed hole size. These offer strong mechanical performance. The rivet body is made of stainless steel and the mandrel is stainless steel for very strong corrosion resistance. (For most superior corrosion resistance, 300 series closed end mandrels may be available on special order.) The head has the standard dome shape. These closed end blind rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to, .020”, .125”, .250”, .500”, .750”, and 1.00″. The body diameters are typically available in four sizes: 1/8”, 5/32”, 3/16”, and 1/4”. Note, the 1/4” diameter rivets have a 1.250″ mandrel length minimum.

F = Stainless Steel Body
B = Dome Head
F = Stainless Steel Mandrel

Typical RivetKing® Part numbers:
FBF-42-CE, FBF-43-CE, FBF-44-CE, FBF-45-CE, FBF-46-CE, FBF-48-CE, FBF-52-CE, FBF-53-CE, FBF-54-CE, FBF-56-CE, FBF-58-CE, FBF-510-CE, FBF-62-CE, FBF-63-CE, FBF-64-CE, FBF-66-CE, FBF-68-CE, FBF-610-CE, FBF-612-CE, FBF-82-CE, FBF-84-CE, FBF-86-CE, FBF-88-CE, FBF-810-CE, FBF-812-CE, FBF-814-CE, and FBF-816-CE.

Click to Open a Catalog Excerpt - RivetKing®

PLR™ Rivet: Aluminum | Steel

These blind rivets work great in plastic, composite and soft materials with out-of-round (oblong) holes. The PLR™ peel rivet is scored by the mandrel and split into three parts during installation. These are considered a light duty rivet. For strong corrosion resistance, the RivetKing® PLR™ rivet bodies are made of stainless steel and the mandrels are stainless steel. (For the most superior rust prevention, 300 series mandrels may be available on special order.) The head has the standard dome shape. The body diameters are typically available in five sizes: 1/8”, 5/32”, 3/16”, 5mm, and 1/4”. Each size is available in multiple grip ranges.

A = Aluminum Body
B = Dome Head
S = Steel Mandrel

Typical RivetKing® Part numbers:
ABSM3.2X8/PLR, ABSM3.2X10/PLR, ABSM3.2X12, ABSM3.2X14/PLR, ABSM3.2X16/PLR, ABSM3.2X18, ABSM4X8/PLR, ABSM4X10/PLR, ABSM4X12/PLR, ABSM4X14/PLR, ABSM4X16/PLR, ABSM4X18/PLR, ABSM4X20/PLR, ABSM4X25/PLR, ABSM4.8X10/PLR, ABSM4.8X12/PLR, ABSM4.8X14/PLR, ABSM4.8X16/PLR, ABSM4.8X18/PLR, ABSM4.8X21/PLR, ABSM4.8X24/PLR, ABSM4.8X27/PLR, ABSM4.8X30/PLR, ABSM4.8X32/PLR, ABSM4.8X35/PLR, ABSM4.8X40/PLR, ABSM4.8X45/PLR, ABSM4.8X51/PLR, ABSM5X40/PLR, ABSM5X45/PLR, ABSM5X50/PLR, ABSM5X55/PLR, ABSM5X60/PLR, ABSM5X65/PLR, ABSM5X70/PLR, ABSM5X75/PLR, ABSM5X80/PLR, ABSM5X90/PLR, ABSM5X100/PLR, ABSM5X110/PLR, ABSM5X120/PLR, ABSM5X130/PLR, ABSM5X140/PLR, ABSM5X150/PLR, ABSM5X160/PLR, ABSM5X170/PLR, ABSM5X180/PLR, ABSM5X190/PLR, ABSM6.4X35/PLR, ABSM6.4X50/PLR, ABSM6.4X80/PLR, ABSM6.4X100/PLR, ABSM6.4X120/PLR, ABSM6.4X150/PLR, ABSM6.4X175/PLR, and ABSM6.4X200/PLR.

Click to Open a Catalog Excerpt - RivetKing®

Long Length Rivet: Aluminum | Steel Dome Head

These long length blind rivets are used in areas that require a thick grip range that goes beyond standard sizes. The RivetKing® rivet body is made of aluminum and the mandrel is steel trivalent zinc plated. The head has the standard dome shape. The body diameters are typically available in three sizes (5/32”, 3/16”, and 1/4”), with each size having multiple grip ranges.

Note, the 3/16” long length rivets are made according to DIN 7337 standard in which the body diameter is actually 5mm (.196″). The 3/16” designation has been applied as a reference only as the actual rivet is .196″ diameter. Please ensure the hole design is greater than .200″ to accommodate the rivet.

Typical RivetKing® Part numbers:
01050004035, 01050004040, 01050005040, 01050005045, 01050005050, 01050005055, 01050005060, 01050005065, 01050005070, 01050005075, 01050005080, 01050005090, 010500050100, 010500050110, 010500050120, 010500050130, 010500050140, 010500050150, 010500050160, 010500050170, 010500050180, 010500050190, 01050006480, 010500064100, 010500064120, 010500064150, 010500064175, and 010500064200.

Click to Open a Catalog Excerpt - RivetKing®

Checkmate®: 2 Piece Male | Female

The Checkmate® is the only break-stem permanent fastener to have near flush and aesthetically appealing installation on both sides. This rivet is considered light-duty, offering a nice looking uniform “true head” on both sides of the rivet. The Checkmate® semi-structural rivet is offered in extended lengths and has one of the longest grip ranges available. Available in aluminum body / aluminum mandrel, aluminum body / steel mandrel, and steel body / steel mandrel. The RivetKing® Checkmate® rivet is available in two sizes: 3/16” and 1/4”, with each size having multiple grip ranges.

Typical RivetKing® Part numbers:
6-12-CM, 6-14-CM, 6-17-CM, 6-20-CM, 6-23-CM, 6-26-CM, 6-29-CM, 6-32-CM, 6-35-CM, 8-12-CM, 8-14-CM, 8-18-CM, 8-22-CM, 8-26-CM, 8-30-CM, 8-34-CM, 8-38-CM, 8-42-CM, 8-46-CM, 8-50-CM, 8-50-CM, 8-54-CM, 8-58-CM, and 8-62-CM.

Click to Open a Catalog Excerpt - RivetKing®

Grooved Rivets™

RivetKing® Grooved Rivets™ are light-duty blind rivets and are designed to be installed within a hole made of a fibered material such as wood or some low-to-medium density plastics. When set properly, the annular rings of the grooved rivet will bite into the wood or plastic and will radially expand within the hole. Keep in mind, this rivet is designed to expand within a hole and not at the rear side like most blind rivets. Only one fibered material is necessary as long as it is the final substrate. Other materials can be fastened to wood products if the other material is between the head and the wood. The rivet has an aluminum body with a steel, trivalent zinc plated mandrel. The Grooved Rivet™ is available in body diameter 1/8”, and material grip range .039″ to .236″. Also available in body diameter 5/32” and 3/16”, in multiple grip ranges.

A = Aluminum Body
B = Dome Head
S = Steel Mandrel

Typical RivetKing® Part numbers:
ABSM3.2X6/GROOVED, ABSM4.0X8/GROOVED, ABSM4.0X12/GROOVED, ABSM4.0X16/GROOVED, ABSM4.8X8/GROOVED, ABSM4.8X10/GROOVED, ABSM4.8X12/GROOVED, ABSM4.8X14/GROOVED, ABSM4.8X18/GROOVED, ABSM4.8X21/GROOVED, and ABSM4.8X24/GROOVED.

Click to Open a Catalog Excerpt - RivetKing®