Rivet Nut USA is proud to offer an extensive range of IN STOCK SupraTITE® rivets for your various industrial application requirements.

Below lists more information on the various types of SupraTITE® rivets, along with the associated catalog page for further dimensional and performance details on each rivet.

Your SupraTITE® rivets technical sales engineers are available at Rivet Nut USA, just give us a call or send us an email. We typically revert quotes SAME DAY. Remember to ask us about the right installation tool for your blind rivets!

Aluminum SupraTITE® Rivets: Dome, Low Profile, Large Flange and Recessed Crown Heads

These Aluminum SupraTITE Rivets are heavily used in the truck trailer industry to join two very thin sheets of metal (usually aluminum or steel) together without access to both sides of the application. These also function to laminate a trailer body skin from a single side of the trailer. Best used in thin materials, it has a multigrip range and provides a vibration resistant joint. The low profile flat head style comes in 5/32”, 3/16”, and 1/4″ diameters. The dome head with protruding crown style comes in 5/32”, 3/16”, 1/4″, and 9/32” diameters. The large flange with protruding crown is only available in a diameter of 9/32”. The dome head with recessed crown comes in either 3/16” or 1/4″ diameter. The rivets are offered in a variety of grip ranges that can be installed into material thicknesses including, but not limited to .032”, .125”, .187″, .250”, .375″, .500”, .750”, .875″, and 1.00.”

Click to Open a Catalog Excerpt - RivetKing®
SupraTITE® Rivets, SupraTITE® Fasteners, Aluminum SupraTITE® Rivets, Dome, Low Profile, Large Flange and Recessed Crown Heads

Aluminum SupraTITE® Rivets: Countersunk and Shaveable Brazier Heads

These Aluminum SupraTITE Rivets are designed for mandrels to break high then cut with a snipping tool. The head is then “shaved” to match the solid brazier head. The shaved head style comes in diameters of 5/32”, 3/16”, and 1/4″. The countersunk head style come in diameters of either 3/16” or 1/4″. The rivets are offered in a limited number of grip ranges that can be installed into material thicknesses including, but not limited to .020”, .050”, .150”, .187″, and .250”.

Click to Open a Catalog Excerpt - RivetKing®
SupraTITE® Rivets, SupraTITE® Fasteners, Aluminum SupraTITE® Rivets, Countersunk and Shaveable Brazier Heads

Steel SupraTITE® Rivets: Dome And Countersunk Heads

These Steel SupraTITE Rivets are commonly used in truck trailer applications when fastening skins to vertical or lateral frames, as well as for structural support in metal buildings and/or securing panels for A/C units.  The Steel SupraTITE Rivets are available only with a 1/4″ diameter and can be installed into material thicknesses including .040”, .125”, and .250”. Note the dome head style can be installed into thicker materials (.375”-.625”).

Click to Open a Catalog Excerpt - RivetKing®
SupraTITE® Rivets, SupraTITE® Fasteners, Steel SupraTITE® Rivets, Dome And Countersunk Heads