Rivet Nut USA Part Number C1000
Type: Wrench Type Stroke Tool
Capacity: Low Volume Production/Field Repair
The C1000 wrench type tool installs the RIVNUT® and PLUSNUT® fasteners by using two simple wrenches. As the nut on the top of the tool is turned, the shaft of the tool exerts a linear pull stroke on the fastener. (For novice users, we generally recommend to rather look at the C7000 tool or 140-2000 tool. For experienced users, this tool works phenomenally!)
Unified & Metric Thread Sizes:
Unified Rivet Nuts: 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28
Metric Rivet Nuts: M4, M5, M6
Unified Plusnuts®: 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28
Metric Plusnuts®: M4, M5, M6
- Mandrel & Anvil required for each thread size. These are considered consumables of the tool, please keep backup(s) on hand!
- Please consult us on your exact fastener and application to assure you invest in the most capable tool for the job.
- Note: Material type of fastener is critical. Example: Install tool may be set up for a 1/2-13 rivet nut, but tool is only capable of installing a soft aluminum 1/2-13 rivet nut, and can not install a harder steel or hardest stainless steel 1/2-13 rivet nut. A heavier duty tool would be required to install the harder steel or hardest stainless steel 1/2-13 rivet nut. Call us with questions!
Resources: