Rivet Nut USA Part Numbers C6000 / C7000
Style: Single Lever Type
Capacity: Low-to-Medium Volume Production

Rivet Nut USA Bollhoff C7000 single lever rivet nut tool, rivnut® installation tool, rivnut® tool, rivnut hand install tool

$200+
Get A Quote!

Many in-stock tool options to fit all needs & budgets!

Pricing varies by style, setup, and quantity.

This should be your go-to hand rivet nut tool if you are doing low to medium volume installation work for one type of thread (i.e., a #6-32 rivet nut). It’s a time tested tool. The C6000 & C7000 is a lever type hand tool that is operator pressure controlled and designed to install RIVNUT® or PLUSNUT® fasteners. It features a plunger rotation knob for efficient spin-on and spin-off of the RIVNUT® or PLUSNUT®.

Unified & Metric Thread Sizes:

C6000

Unified Rivet Nuts:  4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28
Metric Rivet Nuts: M3, M4, M5, M6

C7000

Unified PLUSNUTS®: 4-40, 6-32, 8-32, 10-24, 10-32
Metric PLUSNUTS®:
M4, M5

  • Mandrel & Anvil required for each thread size.  These are considered consumables of the tool, please keep backup(s) on hand!
  • Please consult us on your exact fastener and application to assure you invest in the most capable tool for the job.
    • Note:  Material type of fastener is critical.  Example: Install tool may be set up for a 1/2-13 rivet nut, but tool is only capable of installing a soft aluminum 1/2-13 rivet nut, and can not install a harder steel or hardest stainless steel 1/2-13 rivet nut.  A heavier duty tool would be required to install the harder steel or hardest stainless steel 1/2-13 rivet nut. Call us with questions!

Resources: